DNS

When we register a domain, there is a section in its configuration called DNS. The DNS allow to turn domain names understandable by humans into numbers that correspond to the different devices connected and publicly accessible on the Internet. There are different types of content that a server can display. Among them, the most common are websites and email. For these services to work properly and from any location using names rather than numbers, it is necessary to make public the device on which the services are hosted. This communication is done by properly configuring the DNS records.

DNS records are configured from the interface provided by your domain provider. This means that there may be slight differences in the syntax required by each. In this tutorial we have tried to cover all possible options.

Remember that MaadiX is not a domain provider and does not offer a DNS zone editor.

Web pages

Type A record

To make a website available by visiting your domain from a browser, the A record value of the domain’s DNS must be the same as your server’s IP.

This table shows how to configure type A record for the domain example.com and for the subdomain subdomain.example.com.
In the first line of the table, within the column ‘Name’, the character ‘@’ has been used, which represents the name of the domain.

In the second line we are specifying in the column ‘Name’ the name of the subdomain. As you can see, it’s not necessary to specify the value of the domain, so we’ll use ‘subdomain’ instead of ‘subdomain.example.com’.

The ‘Value’ column refers to the IP. You will have to replace this example value with the IP of your server. You can find this value in your control panel: go to the View Domains’ tab and click in View Domains’ tab and click in ‘View DNS’ for the domain you want to configure.

Type

Name

Value

A

@

8.8.8.8

A

subdomain

8.8.8.8

Mail server

The DNS configuration for the mail service is more complex than the previous one, and involves the activation of more than one records for proper functioning. Some of these records are optional, but their absence could cause your emails to be marked as spam. The records you will have to configure are 3:

  • MX

  • SPF

  • DKIM

You will find the correct values for each of them in the control panel by going to ‘Domains’>’View Domains’ tab and clicking in ‘View DNS’.

MX Record

This record is strictly indispensable. For the e-mail to be managed by your server and not by another external service, the value of the MX record of the DNS of your domain or subdomain will have to be the same as the full name of your server in MaadiX: example.maadix.org. Keep in mind that some domain providers may not require you to add the dot after the value.

Example MX records for the domain example.com and the subdomain subdomain.example.com on a maadix server named example.maadix.org:

Type

Name

Value

Priority

MX

@

example.maadix.org.

10

MX

subdomain

example.maadix.org.

10

Example MX records for the domain example.com and the subdomain sub.example.com in text format (for those providers that do not provide a form):

@ 10800 IN MX 10 example.maadix.org. subdomain 10800 IN MX 10 example.maadix.org.

SPF Record

The SPF (Sender Policy Framework) is a TXT-type record that specifies which servers can send email on behalf of your domain. Email service providers often require valid SPF records. A missing or incorrect SPF record can cause your email to be sent to the spam folder. Some operators may even block your emails completely.

To avoid these problems, you will have to add the following TXT record to each domain or subdomain you want to use to create email accounts (in addition to the MX record), replacing the value 8.8.8.8 with your server IP and example.maadix.org with the full name of your server in MaadiX.
Please note that some providers do not require quotation marks for the value in the ‘Value’ field.

Type

Name

Value

TXT

@

“v=spf1 mx ip4:8.8.8.8 a:example.maadix.org ~all”

TXT

subdomain

“v=spf1 mx ip4:8.8.8.8 a:example.maadix.org ~all”

DKIM Record

The purpose of DKIM (DomainKeys Identified Mail) is to ensure that a message sent by example.com is actually from example.com. To do this, DKIM automatically adds a digital signature to each message. This signature is based on a private key known only to the server that sends the mail. The receiving server can use the public key (included in the DKIM record of the DNS) to decode the signature and ensure that the message has not been altered. Although the initial purpose was security, many mail providers, including Gmail, Yahoo, and others, use the DKIM information to validate the quality and authenticity of the message. If the DKIM signature fails, there is a very high probability that the message will be sent to the spam folder.

Given the complexity of its configuration, it is better to make sure that you have correctly inserted your value in the DNS records since, as with SPF records, it is better not to have any DKIM records than to have an incorrect one.

Unfortunately, this type of record has a different syntax depending on the provider you have registered your domain with. Here are some examples of valid syntax for DKIM You will have to either try to find the right one for your provider or contact them directly to guide you through the process. The value of the string p=… is the public key, which changes for each domain. You will find the correct string in ‘View Domains’ tab, clicking on ‘View DNS’ of the domain you are setting, and going to the “DKIM records for email” section.

Examples of DKIM record syntax for domain example.com and subdomain sudomain.example.com Remember that some providers do not require quotation marks for the value of the ‘Value’ field.

E j . n º

Typ e

Name

Value

1

TXT

default._domainkey

“v=DKIM1; k=rsa; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDZTroW VFpkfXklFulqg8pdg/cWS+ORgoi1x97l5NyqlqL7R1qazo IVQ63TYUS8yjxU87z4FAr/zb/+p2ayk+wVqXA7twWLuHPh EHdiBQM5cEbaPX/Q3fMYULTPkmuVLA/aAcNUr3xagyNfpO zUmUAvJfOfozaSik9/ZmHRFFvzdwIDAQAB”

2

TXT

default._domainkey. example.com

“v=DKIM1; k=rsa; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDZTroW VFpkfXklFulqg8pdg/cWS+ORgoi1x97l5NyqlqL7R1qazo IVQ63TYUS8yjxU87z4FAr/zb/+p2ayk+wVqXA7twWLuHPh EHdiBQM5cEbaPX/Q3fMYULTPkmuVLA/aAcNUr3xagyNfpO zUmUAvJfOfozaSik9/ZmHRFFvzdwIDAQAB”

3

TXT

default._domainkey. subdomain.example.co m

“v=DKIM1; k=rsa; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDZTroW VFpkfXklFulqg8pdg/cWS+ORgoi1x97l5NyqlqL7R1qazo IVQ63TYUS8yjxU87z4FAr/zb/+p2ayk+wVqXA7twWLuHPh EHdiBQM5cEbaPX/Q3fMYULTPkmuVLA/aAcNUr3xagyNfpO zUmUAvJfOfozaSik9/ZmHRFFvzdwIDAQAB”

4

TXT

default._domainkey. subdomain

“v=DKIM1; k=rsa; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDZTroW VFpkfXklFulqg8pdg/cWS+ORgoi1x97l5NyqlqL7R1qazo IVQ63TYUS8yjxU87z4FAr/zb/+p2ayk+wVqXA7twWLuHPh EHdiBQM5cEbaPX/Q3fMYULTPkmuVLA/aAcNUr3xagyNfpO zUmUAvJfOfozaSik9/ZmHRFFvzdwIDAQAB”

  • Example 1: this record refers to a top level domain (example.com in our example). Some providers do not require you to specify the domain name, so ‘default._domainkey’ is the value you will have to insert in the ‘Name’ field

  • Example 2: this record refers to a top level domain (example.com in our example). Some providers require you to specify the domain name, so ‘default._domainkey.example.com’ is the value you will have to insert in the ‘Name’ field.

  • Example 3: this record refers to a second level domain or subdomain (subdomain.example.com in our example). Some providers require you to specify the domain name, so ‘default._domainkey.subdomain.example.com’ is the value you will have to insert in the ‘Name’ field.

  • Example 4: this record refers to a second level domain or subdomain (subdomain.example.com in our example). Some providers do not require you to specify the domain name, so ‘default._domainkey.subdomain’ is the value you will have to insert in the ‘Name’ field.

Examples of DKIM records for example.com and subdomain.example.com in text format (for those providers that do not provide a form):

default._domainkey 10800 IN TXT    "v=DKIM1; k=rsa; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDZTroWVFpkfXklFulqg8pdg/cWS+ORgoi1x97l5NyqlqL7R1qazoIVQ63TYUS8yjxU87z4FAr/zb/+p2ayk+wVqXA7twWLuHPhEHdiBQM5cEbaPX/Q3fMYULTPkmuVLA/aAcNUr3xagyNfpOzUmUAvJfOfozaSik9/ZmHRFFvzdwIDAQAB"

default._domainkey.example.com. 10800 IN TXT    "v=DKIM1; k=rsa; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDZTroWVFpkfXklFulqg8pdg/cWS+ORgoi1x97l5NyqlqL7R1qazoIVQ63TYUS8yjxU87z4FAr/zb/+p2ayk+wVqXA7twWLuHPhEHdiBQM5cEbaPX/Q3fMYULTPkmuVLA/aAcNUr3xagyNfpOzUmUAvJfOfozaSik9/ZmHRFFvzdwIDAQAB"

default._domainkey.subdomain.example.com. 10800 IN TXT    "v=DKIM1; k=rsa; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDZTroWVFpkfXklFulqg8pdg/cWS+ORgoi1x97l5NyqlqL7R1qazoIVQ63TYUS8yjxU87z4FAr/zb/+p2ayk+wVqXA7twWLuHPhEHdiBQM5cEbaPX/Q3fMYULTPkmuVLA/aAcNUr3xagyNfpOzUmUAvJfOfozaSik9/ZmHRFFvzdwIDAQAB"

default._domainkey.subdomain 10800 IN TXT    "v=DKIM1; k=rsa; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDZTroWVFpkfXklFulqg8pdg/cWS+ORgoi1x97l5NyqlqL7R1qazoIVQ63TYUS8yjxU87z4FAr/zb/+p2ayk+wVqXA7twWLuHPhEHdiBQM5cEbaPX/Q3fMYULTPkmuVLA/aAcNUr3xagyNfpOzUmUAvJfOfozaSik9/ZmHRFFvzdwIDAQAB"

To check if the DKIM record you have created for your domain is correct, you can go to the following page, enter your domain name + :default and select ‘DKIM Lookup’ from the drop down menu.

If your domain were example.com, you should insert example.com:default.

Screenshot

Online DKIM check